Pedestals and equipment racks
Pedestals for digital cinema projectors and equipment racks for the projection room. A load-bearing plate for the projector and rack space for the server, sound processor and amplifiers in one.
PN XC-PED-900-17U
Steel pedestal for a digital cinema projector with two 17U rack columns for the server, sound processor and amplifiers. A 1,080 × 764 mm plate rated for 500 kg, tilt up to 10° and 190 mm of foot adjustment, so the image height is set on site. Made in six heights from 350 to 1,350 mm, see the variants. Delivered including placement in the auditorium and projector mounting.
PN XC-RACK-24U-800
Steel rack for the projection room: server, sound processor, amplifiers, switch and UPS. 19" rails on the front, rear, side, top and bottom panels, 500 kg capacity, assembles in under ten minutes. Made in three depths (600, 800 and 1,000 mm) and heights from 12U to 48U, see the variants. Delivered fitted out and wired.
PN XC-PED-3DH
A universal frame in front of the projector lens for mounting a 3D system. Adjustable 260 to 560 mm in width, 150 mm in height and 285 mm in depth, rated for 20 kg. Fits any type of pedestal, finished in anti-corrosion powder paint. A reinforced version with side extensions covers a wider installation range.
PN XC-PED-CART
A cart that moves the pedestal with the projector still mounted, without taking anything apart. Leg fixators hold the position and the wheels retract, so the pedestal ends up standing on its own feet again. Rated for 500 kg.
PN XC-PED-LIFT-450
A scissor hoist between the pedestal and the projector that sets the image height anywhere from 150 to 450 mm above the plate. Rated for 600 kg, with holes for several rail spacings so it fits different projector types. A 3D system bracket can be added to it.